Using a wireless router makes computing life much more enjoyable. Why confine yourself to work on the computer in the same location you took it out of the box? Setting up a wireless router is easy and allows you the leisure to entrance the Internet, files, printers, plus much more, from virtually any location in your house or yard. Before you shake your head about setting up a wireless router on your own, trust me, if I can do it, anything can.
Here are some uncomplicated steps for setting up your wireless router.
Netgear Default Password
Select the strict wireless router for your needs.
Cisco-Linksys WAP54G Wireless-G Access Point Best
Rate This Product :
Cisco-Linksys WAP54G Wireless-G Access Point Feature
- Supports data rates up to 54 Mbps--up to 5 times faster than 802.11b
- Backwards compatible with existing IEEE 802.11b devices at 11 Mbps
- Supports 64- and 128-bit WEP encryption
- Wireless MAC address filtering
- Router not included, so you cannot connect multiple users to the Internet
- Supports data rates up to 54 Mbps-up to 5 times faster than 802.11b
Cisco-Linksys WAP54G Wireless-G Access Point Overview
ou’ve got the network – now enhance it with Wireless-G access up to 54 Mbps. Now it’s easy to grow your network by adding computers, printers and other wireless devices, without stringing cables. Also compatible with Wireless-B devices . Reliable connectivity allows you to move your laptops, or set up your devices all around your home or office. Or add Access Points to two separate networks and create “cable-less cable” connectivity between them.Cisco-Linksys WAP54G Wireless-G Access Point Specifications
Amazon.com Product Description The Linksys Wireless-G access point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your network. Because both standards are built-in, you can protect your investment in existing 802.11b infrastructure, and migrate your network clients to the new screaming-fast Wireless-G standard as your needs grow.For more information on the differences between an access point and a router with access point, see the following table:
Wireless-G is the upcoming 54 Mbps wireless networking standard that's almost five times faster than the widely deployed Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspots around the country--but since they share the same 2.4 GHz radio band, Wireless-G devices can also work with existing 11 Mbps Wireless-B equipment.
Future-proof your wireless network with the Linksys Wireless-G access point. You'll enjoy Wireless-B connectivity today, and be prepared for a high-speed Wireless-G tomorrow.
The Linksys Wireless-G access point is compatible with Windows 95, 98, Me, NT 4.0, 2000, and XP.
See a comparison diagram of the different wireless technologies. | Wireless networks are rapidly becoming more popular and coming down in price. Since they don't require cables, you can use the devices anywhere in an office or home, even out on the patio. There's no need to roll out an Ethernet network cable to each room of a house; you can network anywhere--without wires. Outside the home, wireless networking is available in hotspots at coffee shops, businesses, and airports--great when you're on the road and need to get some work done. For convenience, wireless networking is the answer. Basically, a standard is a set of specifications for a device. All devices that follow a specific standard share operating characteristics, such as the radio frequency used and maximum data transfer speed.
To learn about the differences between the standards and select the right one for your network, click here for an easy-to-understand chart. |
Customer Reviews
*** Product Information and Prices Stored: Jan 11, 2012 01:46:22
If you walk into your nearest Best Buy or other computer store, you will see they have a wide range of routers available. There are basically (3) wireless networking technologies on the market today; 802.11a, 802.11b, and 801.22g. So what are the differences in the middle of these wireless technologies?
802.11a wireless protocol is the oldest version of wireless networking technologies currently available. While you may find 802.11a wireless hardware at discounted prices, I would strongly urge you to avoid them. 802.11a is limited in range and capacity versus 802.11b and 802.11g. So why set up your first wireless network with the oldest technology.
802.11b wireless protocol (11Mbs) is by far the most tasteless wireless technology in use today. If you elect this wireless protocol, you will be fine. But why not start with the most recent and most wireless protocol currently available?
802.11g is the best wireless technology on the market and all new computers with built-in wireless cards use this protocol. 802.11b wireless protocol was superceded by backwards compatible 802.11g (54Mbs). What this means is that if you have an 802.11b card on some of your computing devices, you can use an 802.11g wireless router without the need to replace your wireless card. If you have the option, I would strongly propose purchasing 802.11g cards for your computers as well to get the maximum benefits of this wireless network technology.
Connecting your wireless router
Before starting, be sure you have a paper copy of all instructions or the router by hand in front of you. Sounds simple, I know, but you would be surprised how many people neglect this basic step. Ok, let's get started!
The first step will be to power down your Dsl or cable modem. This will be done by unplugging the devices from the electrical outlets.
Next, associate the wireless router to your modem. I would propose holding the length in the middle of the router and modem as close as possible. I have both modem and wireless router setting side by side on my desk.
Included with the wireless router, you should have a short cable. This is your network cable. Plug the network cable into the wireless router in the port labeled Internet, Wan Or Wlan. This designation varies depending on the brand of wireless router you purchased. It does not matter which end of the network cable you associate to the router, since the same type of connector is used on both ends.
Once you have connected the network cable to your wireless router, associate the other end of the cable into your modem. Your modem will only have one port available. You will hear a "click" when a procure relationship has been established.
You can now re-insert the cable which provides your Internet entrance back into your Dsl or cable modem.
At this point, you will want to power up your modem. The modem should always be powered up first. Allow a few moments for the Internet relationship to synchronize with the modem.
It is now time to configure your wireless router. Temporarily disconnect the network cable from the router and modem. Once you have completed this, associate the network cable to any port on the wireless router not labeled as Internet, Wan Or Wlan. You will probably have at least 4 open ports; any one will do. Next, associate the other end of the network cable to your computer. This may seem confusing, however, you need a direct relationship in the middle of the router and computer to permit configuration.
On your computer, open up an Internet browser and enter the address which corresponds to your specific make of wireless router.
Router Address Username Password
3Com 192.168.1.1 admin admin
D-Link 192.168.0.1 admin
Linksys 192.168.1.1 admin admin
Microsoft Broadband 192.168.2.1 admin admin
Netgear 192.168.0.1 admin password
Once you have entered the address into your browser, you will be prompted to enter a username and password. Reference the chart for your respective information. While in the configuration mode, you will have the choice to turn your password, which I strongly suggest.
Next, you will need to set your network id or Ssid. This name does not have to be lengthy, but choose something that is unique and but easy enough for you to remember.
Protecting your network. You will also have the choice to either procure your network or leave it "open". By leaving your network "open", anything within range of your wireless router signal will be able to entrance your network. If you live in a location in a development or apartment, there is a good opening person will be riding your network..using your Internet entrance for free and degrading your entrance quality. It is a good rule of thumb to procure entrance to networks and computers whenever possible.
To procure your network, elect the Wep tab or option. Wep stands for Wireless Encryption. You will be prompted to enter a password or passphrase. We have already addressed changing your administrator password from the default, so let's move on. Be sure to elect Apply or Ok after manufacture your selections.
Disconnect the network cable from your computer, and reconnect as before. One end of the network cable goes into the port on the wireless router marked Internet, Wan, or Wlan, and the other end connects to your Dsl or cable modem.
After a few brief moments, an icon should appear on your desktop alerting you a wireless network has been detected. Right click on the icon and elect "View available Wireless Networks".
If you do not see your network, click on the Refresh button from the menu. Once your network is visible, click on it.
If you have Wep protected your wireless network, you will be prompted to enter your password or passphrase. If you have chosen to leave your network unprotected, you will be cautioned that you are attempting to entrance an unsecured network. elect your network and press "Connect".
Article written by Lsg at Lilsurfergirl.com [http://lilsurfergirl.com/2007/11/08/choosing-the-right-laptop/]
Setting Up A Wireless Router
No comments:
Post a Comment